Skip to product information
1 of 1

Everbuild C4 Gun A Nail Extra Strength Quick Grab Adhesive

Everbuild C4 Gun A Nail Extra Strength Quick Grab Adhesive

Regular price £2.84
Regular price Sale price £2.84
Sale Sold out
Sorry, Out Of Stock.
SKU:55-SBGANC4-01

EVERBUILD® GUN A NAIL® EXTRA


EVERBUILD® GUN A NAIL® EXTRA IS A HIGH STRENGTH, GAP FILLING ADHESIVE PROVIDING EXTRA BOND STRENGTH AND A QUICK CURE IN EXTERNAL APPLICATIONS.

PRODUCT DESCRIPTION
EVERBUILD® GUN A NAIL® EXTRA is a ready to use gap filling and panel adhesive based on a high bond strength synthetic rubber/resin mix in a solvent carrier. Adheres to most common surfaces inside and outside the home. Bonds to wood, plaster, plasterboard, carpet, carpet grippers, metal, glass, ceramics, brick, concrete, cork, uPVC and certain plastics.

USES
Bonding dado rails, architrave’s and skirting.
Fixing parquet and cork flooring.
Fixing wall cladding direct to internal wall surfaces or timber battens.
Fixing battens directly onto walls without fastenings.
Bonding carpet gripper systems to most floorswithout the need for nails or tacks.
Bonding stair nosing to concrete or wooden stairs.
Fixing polyester, wood,PVCu or metal thresholds.
Fixing nameplates, plastic boxes, decorative frames, wall sockets and junction boxes to most surfaces.
Securing aluminium or other skin panels to the framework or portable industrial buildings and caravans.

CHARACTERISTICS / ADVANTAGES
Solvent based formula- quick drying / high early bond strength.
Excellent adhesion/bond strength - adheres to most common surfaces.
Exceptional early grab properties - usable in both vertical and horizontal positions.
High solids formulation - excellent gap filling properties without shrinkage.
Suitable for use where both surfaces are non-porous.
Excellent external weathering properties - Suitable for exterior use.

APPLICATION INSTRUCTIONS
SUBSTRATE PREPARATION
The surfaces to be glued must be clean, dry and free from dust, grease and other contaminants. New concrete or plaster should be allowed adequate time to dry and mature. If this is not possible, use EVERBUILD GUN A NAIL.
Porous or friable surface should first be primed with dilute contact adhesive and allowed to dry.

APPLICATION METHOD / TOOLS
1. To bond flat panels direct to walls
Apply as a bead approx. 6mm in diameter around the periphery of the panel (50mm from the edge) and in horizontal lines at approximately 450mm centers. Immediately press the panel firmly to the wall surface to ensure adequate transfer of the adhesive and leave to set. A firm bond is achieved in 1 hour.N.B. If the panel is warped, apply the adhesive as described then press
the panel firmly into the wall surface and pull away immediately. This will achieve a quicker adhesive transfer and allow quicker solvent evaporation. After 5 mins, the panel may then be bonded into position and a contact bond achieved.
2. To bond Stair Nosings
Apply adhesive to the stair nosing only. 2 or 3 beads may be necessary depending on the size of the nosing.
Immediately press the nosing firmly into position to ensure adequate transfer of the adhesive. If a higher initial bond strength is required, press the nosing into position and then pull away to affect the adhesive transfer. Allow adhesive to dry apart for 5 minutes before pressing finally into position. Allow to dry for 24 hours before subjecting to traffic.

LIMITATIONS
Do not use on damp surfaces: use EVERBUILD GUN A NAIL.
Do not use as a mirror adhesive: use EVERBUILD MIRROR MATE.
Do not use on polystyrene/styrofoam/expanded polyurethane - use EVERBUILD GUN A NAIL.
Heavy materials (greater than 8kg per sq meter) must be supported for at least 8-24 hours depending on size of item.
Solvents present may attack sensitive plastics. If in doubt, test a small area first.

Delivery

We aim to dispatch all orders placed by 1pm the same day.

We offer 2 delivery services:

Standard 3-5 working day - £3.99

Next Working Day - £5.99

Please note that some items on our site do come direct from the supplier and may not be available on Next Day Delivery.

Collection

We offer a click and click service from our Dundee Depot.

We aim to have orders ready to collect within 24 hours.Please note that this may not be possible if the item is not held in stock and needs to come on from the supplier.

Description

EVERBUILD® GUN A NAIL® EXTRA


EVERBUILD® GUN A NAIL® EXTRA IS A HIGH STRENGTH, GAP FILLING ADHESIVE PROVIDING EXTRA BOND STRENGTH AND A QUICK CURE IN EXTERNAL APPLICATIONS.

PRODUCT DESCRIPTION
EVERBUILD® GUN A NAIL® EXTRA is a ready to use gap filling and panel adhesive based on a high bond strength synthetic rubber/resin mix in a solvent carrier. Adheres to most common surfaces inside and outside the home. Bonds to wood, plaster, plasterboard, carpet, carpet grippers, metal, glass, ceramics, brick, concrete, cork, uPVC and certain plastics.

USES
Bonding dado rails, architrave’s and skirting.
Fixing parquet and cork flooring.
Fixing wall cladding direct to internal wall surfaces or timber battens.
Fixing battens directly onto walls without fastenings.
Bonding carpet gripper systems to most floorswithout the need for nails or tacks.
Bonding stair nosing to concrete or wooden stairs.
Fixing polyester, wood,PVCu or metal thresholds.
Fixing nameplates, plastic boxes, decorative frames, wall sockets and junction boxes to most surfaces.
Securing aluminium or other skin panels to the framework or portable industrial buildings and caravans.

CHARACTERISTICS / ADVANTAGES
Solvent based formula- quick drying / high early bond strength.
Excellent adhesion/bond strength - adheres to most common surfaces.
Exceptional early grab properties - usable in both vertical and horizontal positions.
High solids formulation - excellent gap filling properties without shrinkage.
Suitable for use where both surfaces are non-porous.
Excellent external weathering properties - Suitable for exterior use.

APPLICATION INSTRUCTIONS
SUBSTRATE PREPARATION
The surfaces to be glued must be clean, dry and free from dust, grease and other contaminants. New concrete or plaster should be allowed adequate time to dry and mature. If this is not possible, use EVERBUILD GUN A NAIL.
Porous or friable surface should first be primed with dilute contact adhesive and allowed to dry.

APPLICATION METHOD / TOOLS
1. To bond flat panels direct to walls
Apply as a bead approx. 6mm in diameter around the periphery of the panel (50mm from the edge) and in horizontal lines at approximately 450mm centers. Immediately press the panel firmly to the wall surface to ensure adequate transfer of the adhesive and leave to set. A firm bond is achieved in 1 hour.N.B. If the panel is warped, apply the adhesive as described then press
the panel firmly into the wall surface and pull away immediately. This will achieve a quicker adhesive transfer and allow quicker solvent evaporation. After 5 mins, the panel may then be bonded into position and a contact bond achieved.
2. To bond Stair Nosings
Apply adhesive to the stair nosing only. 2 or 3 beads may be necessary depending on the size of the nosing.
Immediately press the nosing firmly into position to ensure adequate transfer of the adhesive. If a higher initial bond strength is required, press the nosing into position and then pull away to affect the adhesive transfer. Allow adhesive to dry apart for 5 minutes before pressing finally into position. Allow to dry for 24 hours before subjecting to traffic.

LIMITATIONS
Do not use on damp surfaces: use EVERBUILD GUN A NAIL.
Do not use as a mirror adhesive: use EVERBUILD MIRROR MATE.
Do not use on polystyrene/styrofoam/expanded polyurethane - use EVERBUILD GUN A NAIL.
Heavy materials (greater than 8kg per sq meter) must be supported for at least 8-24 hours depending on size of item.
Solvents present may attack sensitive plastics. If in doubt, test a small area first.

Delivery

Delivery

We dispatch all orders placed before 1pm on the same day. Orders placed after 1pm will be dispatched on the next working day. Orders placed over the weekend will be dispatched on Monday.

Our delivery charges:
Standard Delivery (3-5 working days): £3.99
Express Delivery (1-2 working days): £5.99

We can also ship to the EU or any other country. If you are located outwith the UK, please contact us for a quote using the contact form below.

Returns

If you have received a damaged delivery or an incorrect item, please let us know and we will do our best to rectify the situation. We can either issue a refund for you or send you a replacement item.

If you would like to return the item you purchased, please let us know so we can provide you with the return details.

Please contact us using the contact form below or give us a ring on 01382 770599.