EVERBUILD® EVERFLEX® 115 GP Building Mastic
A TRADITIONAL OIL-BASED POINTING MASTIC
PRODUCT DESCRIPTION
EVERBUILD® EVERFLEX® 115 GP Building Mastic is an oil-based compound intended for general pointing and sealing of many joints in traditional forms of construction.
EVERBUILD® EVERFLEX® 115 GP Building
Mastic provides an effective weatherproof seal.
USES
Perimeter pointing internally and externally around
doors and windows.
Adheres to concrete, brick, wood, metals and glass
without the use of a primer.
Typically used to seal composite sectional panels and
low movement vertical building joints.
CHARACTERISTICS / ADVANTAGES
Overpaintable.
Adheres to most common surfaces.
Semi drying - remains permanently plastic beneath
surface skin.
High solids formulation - excellent gap filling properties.
Good external weathering properties.
Flash Point 65°C
Slump No slump at 70°C when placed in an 18 x 10mm aluminium channel positioned vertically
UV Resistance Mechanical properties will not change, however product may discolour.
Overpainting is recommended
Overpaintability Use conventional decorative paints to increase durability if required.
PRODUCT INFORMATION
Chemical Base Thixotropic paste (ready to use)
Packaging 285ml Cartridge
Colour Brown, Grey, Stone, White
Shelf Life 18 months from date of manufacture when stored in original unopened containers.
Storage Conditions Store in original unopened containers between 15°C and 20°C
Density 1.6 g/cm3 approx
TECHNICAL INFORMATION
Movement Capability Low
Service Temperature -25°C to 70°C (90°C intermittent)
Joint Design Minimum width: 5mm. Maximum width: 20mm.
Minimum depth: 10mm. Maximum depth: 20mm.
For deep joints, reduce depth by using EVERFLEX® FIX AND FILL FOAM or a
suitable joint backer rod. All joints should be designed so that the seal is
placed in a position which does not retain water or form a water trap. Triangular fillets should be no less than 12mm across the face and should be
finished with a flat or convex face.
SYSTEM INFORMATION
Compatibility Can be used in contact with most building materials but should not be used against bituminous compounds.
APPLICATION INFORMATION
Consumption / Yield / Dosage (PRINT
single line)
Approx 10 linear metres per cartridge
Ambient Air Temperature 5°C to 50°C
Curing Time Normally 7 days, the mass below remaining plastic
APPLICATION INSTRUCTIONS
SUBSTRATE PREPARATION
The surfaces to be must be clean, dry and free from dust, grease and other contaminants. New concrete or mortar should be allowed adequate time to dry and mature.
APPLICATION METHOD / TOOLS
Cut the tip off the cartridge taking care not to damage the thread. Apply nozzle and cut at an angle of 45° with an opening slightly larger than the gap to be sealed. Apply using a standard sealant gun. Best results will be obtained by keeping an even pressure on the trigger and keeping the gun at a constant angle to the surface being sealed. To ensure a proper bond, always smooth the sealant down with a spatula or piece of wood wetted with linseed oil or white spirit. An improved joint appearance can be achieved by placing masking tape to both sides of the joint, removing within 5 minutes of application.
CLEANING OF TOOLS
Cleaner: white spirit.
LIMITATIONS
Do not use in areas likely to be exposed to solvents,petrols or oils.
Do not apply to fresh concrete or mortar. Allow 28 days to reduce surface alkalinity.
Do not use in conjunction with bitumen or asphalt - Use WEATHER MATE®.
May stain marble, slate or certain sensitive natural stones.
Do not use on uPVC, polycarbonate or acrylic sheet. - Use SILICONE 450.
Do not use in areas where movement exceeds +/- 5%.
The product takes 24 - 48 hours to skin. It should not be used therefore in areas where it is likely to be subjected to interference or damage (eg floor joints). In such cases, use PURAFLEX 40.
VALUE BASE
All technical data stated in this Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control.
LOCAL RESTRICTIONS
Note that as a result of specific local regulations the declared data and recommended uses for this product may vary from country to country. Consult the local Product Data Sheet for the exact product data and uses.
ECOLOGY, HEALTH AND SAFETY
Consult MSDS for full list of hazards
LEGAL NOTES
The information, and, in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith based on Sika's current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sika's recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the product’s suitability for the intended application and purpose. Sika reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.
Delivery
We aim to dispatch all orders placed by 1pm the same day.
We offer 2 delivery services:
Standard 3-5 working day - £4.95
Next Working Day - £7.50
Please note that some items on our site do come direct from the supplier and may not be available on Next Day Delivery.
Collection
We offer a click and click service from our Dundee Depot.
We aim to have orders ready to collect within 24 hours. Please note that this may not be possible if the item is not held in stock and needs to come on from the supplier.
Description
EVERBUILD® EVERFLEX® 115 GP Building Mastic
A TRADITIONAL OIL-BASED POINTING MASTIC
PRODUCT DESCRIPTION
EVERBUILD® EVERFLEX® 115 GP Building Mastic is an oil-based compound intended for general pointing and sealing of many joints in traditional forms of construction.
EVERBUILD® EVERFLEX® 115 GP Building
Mastic provides an effective weatherproof seal.
USES
Perimeter pointing internally and externally around
doors and windows.
Adheres to concrete, brick, wood, metals and glass
without the use of a primer.
Typically used to seal composite sectional panels and
low movement vertical building joints.
CHARACTERISTICS / ADVANTAGES
Overpaintable.
Adheres to most common surfaces.
Semi drying - remains permanently plastic beneath
surface skin.
High solids formulation - excellent gap filling properties.
Good external weathering properties.
Flash Point 65°C
Slump No slump at 70°C when placed in an 18 x 10mm aluminium channel positioned vertically
UV Resistance Mechanical properties will not change, however product may discolour.
Overpainting is recommended
Overpaintability Use conventional decorative paints to increase durability if required.
PRODUCT INFORMATION
Chemical Base Thixotropic paste (ready to use)
Packaging 285ml Cartridge
Colour Brown, Grey, Stone, White
Shelf Life 18 months from date of manufacture when stored in original unopened containers.
Storage Conditions Store in original unopened containers between 15°C and 20°C
Density 1.6 g/cm3 approx
TECHNICAL INFORMATION
Movement Capability Low
Service Temperature -25°C to 70°C (90°C intermittent)
Joint Design Minimum width: 5mm. Maximum width: 20mm.
Minimum depth: 10mm. Maximum depth: 20mm.
For deep joints, reduce depth by using EVERFLEX® FIX AND FILL FOAM or a
suitable joint backer rod. All joints should be designed so that the seal is
placed in a position which does not retain water or form a water trap. Triangular fillets should be no less than 12mm across the face and should be
finished with a flat or convex face.
SYSTEM INFORMATION
Compatibility Can be used in contact with most building materials but should not be used against bituminous compounds.
APPLICATION INFORMATION
Consumption / Yield / Dosage (PRINT
single line)
Approx 10 linear metres per cartridge
Ambient Air Temperature 5°C to 50°C
Curing Time Normally 7 days, the mass below remaining plastic
APPLICATION INSTRUCTIONS
SUBSTRATE PREPARATION
The surfaces to be must be clean, dry and free from dust, grease and other contaminants. New concrete or mortar should be allowed adequate time to dry and mature.
APPLICATION METHOD / TOOLS
Cut the tip off the cartridge taking care not to damage the thread. Apply nozzle and cut at an angle of 45° with an opening slightly larger than the gap to be sealed. Apply using a standard sealant gun. Best results will be obtained by keeping an even pressure on the trigger and keeping the gun at a constant angle to the surface being sealed. To ensure a proper bond, always smooth the sealant down with a spatula or piece of wood wetted with linseed oil or white spirit. An improved joint appearance can be achieved by placing masking tape to both sides of the joint, removing within 5 minutes of application.
CLEANING OF TOOLS
Cleaner: white spirit.
LIMITATIONS
Do not use in areas likely to be exposed to solvents,petrols or oils.
Do not apply to fresh concrete or mortar. Allow 28 days to reduce surface alkalinity.
Do not use in conjunction with bitumen or asphalt - Use WEATHER MATE®.
May stain marble, slate or certain sensitive natural stones.
Do not use on uPVC, polycarbonate or acrylic sheet. - Use SILICONE 450.
Do not use in areas where movement exceeds +/- 5%.
The product takes 24 - 48 hours to skin. It should not be used therefore in areas where it is likely to be subjected to interference or damage (eg floor joints). In such cases, use PURAFLEX 40.
VALUE BASE
All technical data stated in this Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control.
LOCAL RESTRICTIONS
Note that as a result of specific local regulations the declared data and recommended uses for this product may vary from country to country. Consult the local Product Data Sheet for the exact product data and uses.
ECOLOGY, HEALTH AND SAFETY
Consult MSDS for full list of hazards
LEGAL NOTES
The information, and, in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith based on Sika's current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sika's recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the product’s suitability for the intended application and purpose. Sika reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.
Delivery
Delivery
We aim to dispatch all orders placed by 1pm the same day.
We offer 2 delivery services:
Standard 3-5 working day - £4.95
Next Working Day - £7.50
Please note that some items on our site do come direct from the supplier and may not be available on Next Day Delivery.
Collection
We offer a click and click service from our Dundee Depot.
We aim to have orders ready to collect within 24 hours. Please note that this may not be possible if the item is not held in stock and needs to come on from the supplier.