Product Info:
The Underfloor Heating mat system has a self-adhesive backing and is designed to be laid directly on an insulated concrete floor or Thermal board. The system can be laid onto a prepared plywood floor with either a 1-2mm bed of adhesive being applied first to the ply subfloor or a Thermal board being placed over the plywood floor, secured with supplied fixings.The Klima Underfloor Heating Mat is a heating system designed for under a tile or similar floor finish. The mat is only 4 mm thick and can either be laid into a layer of flexible tile adhesive or a compatible self leveller. The heating cable is fixed evenly over the fibreglass mesh (inter-loop distance approx. 7cm) and has a standard capacity of 150 W/m2.

The Mat is fully earthed sheathed and is suitable for wet areas when used in conjunction with a dedicated RCD.

Benefits

Economically warms the entire surface

Easy and quick installation

Primary or comfort heating

Specification
Construction: Teflon coated cable with PVC Outer Sheath
Wattage: 11 Watts Per meter -230/240 Volts
Tested Range: 4000-10000v
Cable diameter: 3.5mm
Certifications: FI/CE.VDE
Thermostat
This stylish, intuitive & connective thermostat is designed specifically for electric underfloor heating, with wifi connect function
Frame: IP 21
Voltage: 230 Volt – 50/60Hz
Temperature Range: +5/+70°C
Testing: CE
Please Note

The heating cable cannot be cut, however the mesh it is mounted on may be cut and shaped to suit

For the best results we always recommend installing the mat on an insulated sub floor or thermal board

A heat loss calculation is always recommended to determine whether the system can be used as a primary heat source

We recommend that you check with your floor covering supplier to check compatibility

Kit content

Underfloor Heating Mat

Instruction Manual

10mm flexible conduit pipe for floor sensor

Digital Wifi Thermostat with sensor

Instructions

Before you begin, if you are fitting onto an uninsulated or concrete floor it is advisable to first screed.

Lay the first run of matting. At the end of the run cut the fibreglass mat leaving the heating cable, turn the mat 90º or 180º, depending on requirements, and continue laying.

Once completed the entire floor, you can cover the mat with a self leveller and leave to dry before tiling. The matting should not be turned on for minimum 14 days after installation

Full Instructions manual is included in the box

Delivery

We aim to dispatch all orders placed by 1pm the same day.

We offer 2 delivery services:

Standard 3-5 working day - £4.95

Next Working Day - £7.50

Please note that some items on our site do come direct from the supplier and may not be available on Next Day Delivery.

Collection

We offer a click and click service from our Dundee Depot.

We aim to have orders ready to collect within 24 hours. Please note that this may not be possible if the item is not held in stock and needs to come on from the supplier.